Parker AC30 - Page 387

Parameter Reference D-127
AC30 series Variable Speed Drive
Parameter Name
No.
Path
Default
Range
Units
Writable
Crossing zero speed
Torque ON
Open Loop
Closed loop
Speed setpoint (2)
Current setpoint (3)
Startup speed
0.75 * Startup speed
Startup current
Speed input (1)
Startup current
0.75 * Startup speed
Startup speed
Ramp (4)
Startup
time
(5)
(1) : User speed setpoint
(2) : Internal speed setpoint
(3) ; Internal current setpoint
(4) : ramps are generated based on ramp parameters
(5) : startup procedure : a current is smoothly installed into the motor
(6) : zero crossing for the speed input : the current must be inverted into the motor