Parker AC30 - Page 443

Parameter Reference D-183
AC30 series Variable Speed Drive
Parameter Name
No.
Path
Default
Range
Units
Writable
Max Available Volts
1527
Parameters::Motor Control::Tr
Adaptation
x.
0 to 10000
V
NEVER
This diagnostic shows the maximum achievable value of motor terminal volts. So for example, when running at rated load, the
required motor terminal volts may be 400v. But if the mains is low, the maximum achievable volts may only be 390v. This diagnostic
shows what is achievable at any particular time, and may be useful to explain why the motor volts may be lower than expected.