Physio Control LIFEPAK 15 - Data Management Service Codes

LIFEPAK 15 Monitor/Defibrillator
Service Manual
Troubleshooting
Data Management Service Codes
Section Menu Section Contents Back Index
124
5
Data Management Service Codes
Table 5.8—Initial Digit 3, Data Management Service Codes (DM)
Code Service Code Description
Corrective
Action Code
3005 DM_ERROR_DATABASE_ERASE_ADJUST (Not able to write new lines for new oldest record; disables flash.)
31, 1
3006 DM_ERROR_DATABASE_ERASE_FAILED (Erase block failed; disables flash; param = block requested.)
31, 1
3007 DM_ERROR_DATABASE_ERASE_VERIFY (Verification of erased block failed; disabled flash; param = block.)
31, 1
3008 DM_ERROR_DATABASE_FLASH_ERASE (Erase database failed; disables flash; param = block # of failure.)
31, 1
3fff DM_ERROR_EXTRA_INFORMATION (Extra error code information for an above error.)
28, 31, 1