LIFEPAK 15 Monitor/Defibrillator
Service Manual
Introduction
Service Information
Section Menu Section Contents Back Index
19
1
Service Information
Before attempting to clean or repair any assembly in the device, the service technician should be familiar with the information
provided in Preventive Maintenance (p. 145).
A qualified service technician (see Service Personnel Qualifications on page 15) should inspect any device that has been dropped,
damaged, or abused to verify that the device is operating within performance standards listed in the Performance Inspection
Procedures (PIP), and that the leakage current values are acceptable.
Replacement procedures for the device are limited to those items accessible at the final assembly level. Replacements and
adjustments must be made by qualified service personnel. Replacements at the final assembly level simplify repair and servicing
procedures and help ensure correct device operation and calibration.
To obtain service and maintenance for your device, contact your local Physio-Control service or sales representative. In the USA,
call Physio-Control Technical Support at 1.800.442.1142. Outside the USA, contact your local Physio-Control representative.
When you call Physio-Control to request service, provide the following information:
• Model number and part number
• Serial number
• Observation of the problem that led to the call
To Next Page
Loading...
