LIFEPAK 15 Monitor/Defibrillator
Service Manual
Modes of Operation
Service Mode
Section Menu Section Contents Back Index
94
4
Service Mode
About Service Mode
Service mode functions allow qualified service personnel to:
• Perform device calibration routines:
~ Defibrillation calibration
~ Pacing calibration
~ Printer calibration
~ CO2 calibration
~ NIBP calibration
~ Temperature calibration
• Perform device tests:
~Buttons test
~ Pixels test
~ Printer test
~ Voice/Tone test
• View the device status registers:
~ Device Log status
~ Service Log status
~ Device Data status
~ Counters status
~ Clear Memory (clears data management memory)
• Set the Service mode passcode
• Set the maintenance prompt interval
To Next Page
Loading...
