LIFEPAK 15 Monitor/Defibrillator
Service Manual
Modes of Operation
AED Mode
Section Menu Section Contents Back Index
91
4
AED Mode
About AED Mode and Entering AED Mode
Factory default settings allow the device to operate in Manual mode. If you want the device to operate in AED (automated external
defibrillator) mode when it is turned on, you must change several setup options in different menus. The Setup/AED Mode menu
allows you to change settings for the AED prompted protocol.
To set up the device to turn on in AED mode:
1. Select MANUAL MODE in the Setup menu (see Setup Mode (p. 92)).
2. In the Setup/Manual Mode submenu, select MANUAL ACCESS.
3. Select the desired AED/XXX option.
4. Press HOME SCREEN.
5. Select MONITORING and then select CHANNELS.
6. Select SET 1 and then select CHANNEL 1.
7. Select PADDLES.
8. Select PREVIOUS PAGE. Confirm that Set 1 appears as the Default Set.
To Next Page
Loading...
