EasyManua.ls Logo

Physio Control LIFEPAK 15 - Processor Control Service Codes

Physio Control LIFEPAK 15
527 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LIFEPAK 15 Monitor/Defibrillator
Service Manual
Troubleshooting
Processor Control Service Codes
Section Menu Section Contents Back Index
126
5
Processor Control Service Codes
Table 5.10—Initial Digit 5, Processor Control Service Codes (PC)
Code Service Code Description
Corrective
Action Code
5002 PC_ERROR_WATCHDOG_SHORT_FAILURE (Main watchdog short test failure. Watchdog failure; param: 0=None, 1=short, 2=long,
3=power.)
1
5003 PC_ERROR_WATCHDOG_LONG_FAILURE (Main watchdog long test failure. Watchdog failure; param: 0=None, 1=short, 2=long,
3=power.)
1
5004 PC_ERROR_WATCHDOG_UNEXPECTED (Unexpected main watchdog reset. Top 16 bits = seconds since last set. Low 16 bits = watchdog
status.)
1
5005 PC_ERROR_RAM_AT_BOOT (RAM error detected during boot; param = Ram Addr of error.)
1
5006 PC_ERROR_BAD_CHECKSUM (Program contents failed Checksum test.)
1
500d PC_ERROR_CONFIG_VERSION (System configuration version mismatch; param = value read.)
1
500e PC_ERROR_CONFIG_CRC (NVRAM system configuration CRC bad; param = value read.)
2, 1
5011 PC_ERROR_METERS_VERSION (System meters version mismatch; param = value read.)
2, 1
5012 PC_ERROR_METERS_CRC (NVRAM system meters/counters CRC bad; param = value read.)
2, 1
5013 PC_ERROR_MFG_DATA_VERSION (Manufacturing data version mismatch.)
2, 1
5014 PC_ERROR_MFG_DATA_CRC (NVRAM manufacturing data CRC bad.)
1
5015 PC_ERROR_FORCED_RESET_FAILED (Forced watchdog reset failed. Unit failed to reset.)
1

Table of Contents

Other manuals for Physio Control LIFEPAK 15

Related product manuals