LIFEPAK 15 Monitor/Defibrillator
Service Manual
Modes of Operation
Demo Mode
Section Menu Section Contents Back Index
96
4
Demo Mode
About Demo Mode
Demo mode allows you to practice or demonstrate the monitoring functions of the LIFEPAK 15 monitor/defibrillator, including:
• ECG lead selection
• SpO2
• SpCO
• SpMet
• CO2
• NIBP
• IP
• Temperature
• Trend graphs
• Alarms
• Events
Entering Demo Mode
To enter Demo mode:
1. Remove all front panel cables from the device (therapy, ECG, etc.). You cannot enter Demo mode if any front panel cable is
attached.
2. Press and hold EVENT and HOME SCREEN, and then turn on the device. The Demo mode screen appears.
3. To exit Demo mode, turn the device off.
To Next Page
Loading...
