LIFEPAK 15 Monitor/Defibrillator
Service Manual
Preventive Maintenance
Device User Test
Section Menu Section Contents Back Index
147
6
Device User Test
Device User test
When you use the SPEED DIAL to navigate to Options/User Test, the device waits until the next self-test cycle is complete. The user
test performs the following tasks:
• Performs a self-test
• Charges the defibrillation capacitor to 10 joules, then dumps the charge
• Stores the test results in the test log
• Displays User Test results and prints report
If this operation does not pass, the Service LED illuminates and an error is written to the Service Log (p. 113).
To Next Page
Loading...
