Physio Control LIFEPAK 15 - Page 61

LIFEPAK 15 Monitor/Defibrillator
Service Manual
Device Description
Physical Description and Features
Section Menu Section Contents Back Index
63
3
Table 3.3— Rear Panel Features
Number Description
1
Hard paddle wells — Storage area for a set of hard paddles.
2
USB port cover — Protects USB port from the environment.
3
System connector — Connects device to a gateway or external computer
for transfer of patient reports. Also provides real-time ECG output.
4
Auxiliary connector — Connection port for an external power
adapter.
5
Battery compartments — Accommodate two removable Lithium-ion
batteries that provide power for the LIFEPAK 15 monitor/defibrillator.
6
Battery contacts — Transfer battery status information.
7
Battery pins — Two pins in each battery compartment transfer the
battery power.
8
CO2 exhaust port (optional) — Vents gasses from CO2 monitor.
9
Paddle retainers — Provide secure retention and quick removal of
paddles.
10
Paddle test contacts — Allow complete paddles defibrillation checks.