Pilz PMCprotego D.48 - Page 123

Wiring
Operating Manual PMCprotego D.48, PMCprotego D.72
1001735-EN-04
123
5
IO-GND
XGND
7
PMCprotego D
X4
STO1-ENABLE
3
STO2-ENABLE 24 V
Application:
PMCprotego S1: 2nd shut-
down route STO/SIL 3 is
not used
PMCprotego S2: Does not
have a 2nd shutdown route
Connect 24 VDC
Referenced to earth: Al-
ways connect XGND (X4/3
or 4) to I/O-GND on the
control system