Pilz PMCprotego D.48 - 6.7.5.3 Resolver

Wiring
Operating Manual PMCprotego D.48, PMCprotego D.72
1001735-EN-04
129
6.7.5.3 Resolver
Under “Connection cables”, please note the requirements for the:
} Cable cross sections
} Insulation material
If the cable length >100m, speak to our Customer Support.
Connector X2 Pin Designation Description
1
5
6
9
1 Shield Internal shield
2 ϑ Thermal switch (+)
3 S4 Sine input
4 S3 Cosine input
5 R2 Reference output
6 ϑ Thermal switch (-)
7 S2 Sine input
8 S1 Cosine input
9 R1 Reference output
Connector pin assignment
Input circuit Resolver
Motor
Thermal switch in the motor
is connected via the re-
solver cable at X2
Twisted pair, shielded
Shield connection in the
connector
Connection