Pilz PMCprotego D.48 - 6.7.5.13 Incremental encoder ROD (AquadB) 5 V, 1.5 MHz

Wiring
Operating Manual PMCprotego D.48, PMCprotego D.72
1001735-EN-04
148
6.7.5.13 Incremental encoder ROD (AquadB) 5V, 1.5 MHz
Under “Connection cables”, please note the requirements for the:
} Cable cross sections
} Insulation material
If the cable length is >50 m, please speak to our Customer Support.
Connector X1 Pin Designation Description
1
8
9
15
1 n.c. --
2 0 V Supply voltage 0 V
3 n.c. --
4 Up Supply voltage 5V
5 B Channel B
6 n.c. --
7 ϑ Thermal switch (+)
8 A Channel A
9 n.c. --
10 Sense 0 V Supply voltage feedback 0V
11 n.c. --
12 Sense Us Supply voltage feedback 5V
13 B\ Channel B inverted
14 ϑ Thermal switch (-)
15 A\ Channel A inverted
n.c.: Not connected
Connector pin assignment