Wiring
Operating Manual PMCprotego D.48, PMCprotego D.72
1001735-EN-04
98
6.2 Block diagram
The following block diagram provides an overview of the wiring for the PMCprotego. The
wiring of the expansion cards is not shown
The block diagram also shows the position and type of shield connections, the PE and the
connections of the attached device to the mounting plate.
Symbol Connection Description
X1, X2, X6, X9 Shield in the connector housing
X3, X8 Shield on the front plate
PE Protective earth, PE
Mounting plate Wide area, electrical connection between the designated
device and the mounting plate in the control cabinet
To Next Page
Loading...
General