Pilz PMCprotego D.48 - 6.7.5.10 SinCos encoder without data track

Wiring
Operating Manual PMCprotego D.48, PMCprotego D.72
1001735-EN-04
142
6.7.5.10 SinCos encoder without data track
Under “Connection cables”, please note the requirements for the:
} Cable cross sections
} Insulation material
If the cable length is >50 m, please speak to our Customer Support.
Connector X1 Pin Designation Description
1
8
9
15
1 B- Cosine -
2 0 V Supply voltage 0 V
3 A- Sine -
4 Up Supply voltage
5 NI+ Zero pulse +
6 n.c. --
7 ϑ Thermal switch (+)
8 n.c. --
9 B+. Cosine +
10 Sense 0 V Supply voltage 0 V
11 A+ Sine +
12 Sense Us Supply voltage
13 NI- Zero pulse -
14 ϑ Thermal switch (-)
15 n.c. --
n.c.: Not connected
Connector pin assignment