Introduction
Operating Manual PMCprotego D.48, PMCprotego D.72
1001735-EN-04
8
1 Introduction
1.1 Validity of documentation
This documentation is valid for the products PMCprotego D.48 and PMCprotego D.72. It is
valid until new documentation is published.
This operating manual explains the product's function and operation, describes the installa-
tion and provides guidelines on how to connect the PMCprotegoD.
Please also refer to the following documents from the motion control range:
} The online help for the commissioning software describes how to set the parameters for
the servo amplifier.
} The "PMCprimo CAN Networking" manual contains guidelines for networking multiple
PMCprimo control systems and additional CANopen devices.
All these manuals can be found on the supplied CD-ROM: "Motion Control Documentation".
You will need to be conversant with the information in these documents in order to fully un-
derstand this manual.
This operating manual is valid for the following products:
} PMCprotego D.48 from Version1.6
} PMCprotego D.72 from Version1.6
1.1.1 Retaining the documentation
This documentation is intended for instruction and should be retained for future reference.
1.2 Definition of symbols
Information that is particularly important is identified as follows:
DANGER!
This warning must be heeded! It warns of a hazardous situation that poses
an immediate threat of serious injury and death and indicates preventive
measures that can be taken.
WARNING!
This warning must be heeded! It warns of a hazardous situation that could
lead to serious injury and death and indicates preventive measures that can
be taken.
To Next Page
Loading...
General