Planmeca Compact I User Manual

Chapter C - SERVICE MODE
Planmeca Compact i C-49
SERVICE MODE DETAILED DESCRIPTION
Technical Manual
n 320 Headrest right joystick horizontal ADC-value
In this service mode the headrest right joystick horizontal ADC-value is shown. Value is typi-
cally ±10 when joystick is centered and from ±40 to ±100 when in use. Positive direction is
away from the backrest.
n 321 Headrest right joystick vertical ADC-value
In this service mode the headrest right joystick vertical ADC-value is shown. Value is typically
±10 when joystick is centered and from ±40 to ±100 when in use. Positive direction is up.
n 322 Headrest left (cabinet side) joystick horizontal ADC-value
In this service mode the headrest left (cabinet side) joystick horizontal ADC-value is shown.
Value is typically ±10 when joystick is centered and from ±40 to ±100 when in use. Positive
direction is away from the backrest.
n 323 Headrest left (cabinet side) joystick vertical ADC-value
In this service mode the headrest left (cabinet side) joystick vertical ADC-value is shown.
Value is typically ±10 when joystick is centered and from ±40 to ±100 when in use. Positive
direction is up.
n.999 Main program loop speed.
Reserved for factory use.
In Set-mode displays speed with filtering.

Planmeca Compact I Specifications

General

Spittoon	Yes
Operating Light	LED
Imaging Technology	Digital
X-ray Tube Voltage	60-70 kV
X-ray Tube Current	7 mA
Focal Spot Size	0.8 mm
Exposure Time Range	3.2 s
Power Supply	50/60 Hz