Polaris xp 2013 eps User Manual

8.9
TRANSMISSION
8
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
8. Loosely install the (2) longer bolts into left side
mounting holes and (2) shorter bolts with washers into
right side mounting holes.
IMPORTANT: DO NOT torque fasteners at this time.
9. Torque left side mounting bolts to specification in
sequence.
10. Torque right side mounting bolts to specification using
the numbered sequence shown.
11. Remove the clutch center distance tool.
12. Remove the spacer or support between the vehicle
frame and engine.
13. Install and properly route the gear position switch
connector (A), speed sensor connector (B),
crankshaft position sensor connector (C), shift
bracket and shift bracket bolts (D), shift cable clevis
pin and washer (E) onto the transmission.
14. Torque the (2) shift cable bracket bolts to
specification.
= T
Engine / Transmission Mounting Bolts:
Step 1-2: 64 ft-lbs (87 Nm)
Step 3: 5 ft-lbs (7 Nm)
Step 4-7: 44 ft-lbs (60 Nm)
1
2
3, 7
4
5
6
= T
Shift Cable Bracket Bolts:
17 ft-lbs (23 Nm)
Remove Spacer / Support
A
B
C
D
E

Polaris xp 2013 eps Specifications

General

Brand	Polaris
Model	xp 2013 eps
Category	Utility Vehicle
Language	English