Polycom 1500 - Procedure 6: Set System Configuration Flags

Polycom RealPresence Collaboration Server (RMX)1500/2000/4000 Deployment Guide for Maximum Security Environments
1-52 Polycom, Inc.
Procedure 6: Set System Configuration Flags
Maximum Security Environments have additional System Flags that control:
• Network Security
• User Management
• Strong Passwords
• Login and Session Management
• Cyclic File Systems
When the Maximum Security Environment is enabled by setting the
ULTRA_SECURE_MODE System Flag to YES, the enhanced security features are enforced.
Table 1-15 lists the default and recommended values of these flags in Ultra Secure Mode.
Table 1-15 System Flags and their default values
Flag Description
Recommended
Value
ALLOW_NON-
ENCRYPT_PARTY_IN_ENC
RYPT_CONF
If YES, allows non-encrypted participants to connect
to encrypted conferences.
Default: No
NO
DISABLE_INACTIVE_USER Determines the number of consecutive days a user
can be inactive before being disabled.
Default: 30
Range: 1-90
30
ENABLE_CYCLIC_FILE_SY
STEM_ALARMS
When set to YES an Active Alarm is created when a
Cyclic File (Log, CDR, Audit) reaches a file retention
time or file storage capacity limit.
Default: YES
YES
FORCE_STRONG_PASSW
ORD_POLICY
Enables or disables all password related flags. This
flag cannot be set to NO when the RMX is in Ultra
Secure Mode.
Default: YES
YES
HIDE_CONFERENCE_PAS
SWORD
When set to YES, Conference and Chairman
passwords are replaced by asterisks in the RMX Web
Client, RMX Manager, Audit Event and Log files.
Default: YES
YES
LAST_LOGIN_ATTEMPTS When set to YES, the system displays a record of the
last Login of the user in the Main Screen of the RMX
Web Client or RMX Manager.
Default: YES
YES