Application > IPDS Setup > Resident Fonts
This option selects either a bit-mapped font (“Compatible”) or a scalable font
(“Scalable”) as the default font.
Selects a bit-mapped font as default.
Selects a scalable font as default.
Application > IPDS Setup > XOH-SMO Support
This option allows the user to disable reporting of XOH-SMO support in the
STM reply.
Do not report that IPDS has support for XOH-SMO.
Report that IPDS has support for XOH- SMO.
Application > IPDS Setup > LF3 Support
This option allows the user to enable reporting of LF3 type coded font
support in the STM and OPC replies. Refer to the IPDS Programmer’s
Reference Manual for more information.
Do not report that IPDS has support for LF3-type
coded fonts..
Report that IPDS has support for LF3-Type coded
fonts.
Application > IPDS Setup > Print IPDS Fonts
This executable menu allows you to print a list of all resident fonts currently
available in the active IPDS emulation (4028 or 3816). See examples below
for both IPDS emulations.
To Next Page
Loading...
