Printronix T6000 - Application > PS;PDF

115
Application > PS/PDF
IMPORTANT The PS/PDF submenu will only be present with the Postsript/PDF firmware.
The Postscript/PDF data is handled by Ghostscript by Artifex, an interpreter compatible with the following:
 Portable Document Format (“PDF”) 1.0, 1.1, 1.2, 1.4, 1.5, and 1.6 as defined in the Portable Document
Format Reference Manual, distributed by Adobe Systems Incorporated.
 PostScript (TM) Language Level 3, as defined in the PostScript Language Reference Third Edition
(ISBN 0-201-37922-8), published by Addison- Wesley in mid-1999.
Ghostscript includes a set of 35 scalable outline fonts in PostScript Type 1 format, compatible in
appearance and metrics with the fonts commonly distributed under the following names:
 Bookman (demi, demi italic, light, light italic)
 Courier ((plain, oblique, bold, bold oblique)
 Avant Garde (book, book oblique, demi, demi oblique)
 Helvetica (plain, oblique, bold, bld oblique narrow, narrow oblique, narrow bold, narrow bold oblique)
 Palatino (roman, italic, bold, bold italic)
 New Century Schoolbook (roman, italic, bold, bold italic)
 Times (roman, italic, bold, bold italic)
 Symbol
 Zapf Chancery (medium italic)
 Zapf Dingbats
The Ghostscript version used in the P8000 is 8.71.
Application > PS/PDF > Host Form Length
This option selects whether job sent with specific page dimensions will
change the settings under Media > Image > Label Length.
Disable
The job will not affect the media label length setting.
Enable
The job will change the media label length setting.
Mismatch Error
A fault will occur if the length sent with the host job
does not match the Media > Image > Label Length
value.
Factory Default
Enable