Application > TN 5250 > Format Control
Enables the printer to reflect the same spacing as CTPC model printers after
absolute and relative move commands are executed.
Reflects distance, generated by the IGP feature, and
Hex Transparent control code sequence, in the new
position (after horizontal and vertical tabs are
executed).
Does not reflect distance, generated by the IGP
feature, and Hex Transparent control code sequence,
in the new position (after horizontal and vertical tabs
are executed).
Application > TN 5250 > Max. Print Width
Set the maximum print width the printer will print when using the TN5250
host interface. Set “13.2 inches” when printing files larger than the width of
the printer. All data exceeding Media > Image > Label Width will be truncated
regardless.
13.2 inches (legacy from line matrix products).
The maximum as set by Media > Image > Label Width.
To Next Page
Loading...
