Printronix T6000 - Host Interfaces; Power

268
Host Interfaces
Table 21. Host Interface Characteristics
1. Serial RS-232 at 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or
115200 baud.
2. USB 2.0
3. Ethernet 10/100
4. Wireless 802.11 a/b/g/n
5. Parallel (Centronics compatible) or IEEE 1284 bi-directional.
The RS-232 host interfaces shall have the following characteristics:
Word Length:
Selectable 7-bit or 8-bit data format
Handshaking:
XON/XOFF (in receive mode only) and
CTS/DTR
Input Buffer:
Selectable from 1k through 16 kbytes.
XOFF is transmitted and DTR goes low
when buffer is equal to or less than 25%
of full. XON is transmitted and DTR goes
high when buffer is 25% above empty.
Characters are transmitted with no parity
from the printer
Power
Table 22. Power Source and Grounding
Power Source:
115 or 230 VAC 50/60Hz switching power
supply.
Grounding:
Unit must be connected to a properly
grounded receptacle.
Table 23. Power Consumption
4 inch printers
6 inch printers
203 dpi
14 ips
300 dpi
12 ips
203 dpi
12 ips
300 dpi
10 ips
Energy Power
Saver Mode
4 Watts
4 Watts
4 Watts
4 Watts
Standby
12 Watts
12 Watts
12 Watts
13 Watts
25% Print Density
207 Watts
168 Watts
263 Watts
275 Watts
T6 in Thermal Transfer Print Mode, +15 Intensity, 120VAC 60Hz input,
22degC @ 40% RH