Media > Fault > Error Recover
This option determines how the printer handles data that was printing when
an error occurred.
The printer will not reprint the label that was printing
when the error condition occurred.
The printer reprints the label that was printing when the
error condition occurred.
Media > Auto Label Map > Select
This option specifies the maximum print width to be used by the application.
The IGP/Auto Label Mapping® feature allows backward compatibility of
programs written for Printronix line-matrix printers. It allows the printer to print
two-up (or other multi-up) labels. Instead of printing multiple labels across the
printer, it prints the leftmost label and the rightmost label, so the printout will
be twice as long but half as wide.
Excess data in any program sent to the printer with
horizontally adjacent labels that exceed the physical
page width of the printer will be clipped or wrapped
depending upon how the emulation is designed.
The printer will automatically reposition the horizontally
adjacent labels to a vertically adjacent position, or a
combination of horizontal and vertical positions based
on the values selected under the Auto Label Width and
Number Labels menu items.
Media > Auto Label Map > Auto Label Width
The width of a single label to be printed or the maximum width of the media
that will be used for the print file. The value is selectable from 00.1 inch
through the maximum print width of the printer.
Media > Image > Label Width value.
Depends on the model width.
To Next Page
Loading...
