116
Application > PGL Setup
IMPORTANT The PGL Setup submenu will only be present when the Active IGP Emulation is
set to PGL. Otherwise, this menu will be replaced with the Active IGP Emulation
Setup menu.
Application > PGL Setup > Character Group
This option selects the Character Set Group. Based on the group selected,
then the character set can be chosen with the menu following XXX Sets. The
group Standard Sets is shown below because it is unique to PGL. All other
groups are similar and described in LP+, PGL, VGL Character Sets.
Application > PGL Setup > Standard Sets
This option will show when menu Character Group is set to Standard Sets.
0) ASCII
1) German
2) Swedish
3) Danish
4) Norwegian
5) Finnish
6) English
7) Dutch
8) French
9) Spanish
10) Italian
11) Turkish
12) CP 437
13) CP 850
14-15) Reserved
16-23 Dwn Overlay
24-31) User Def.
Application > PGL Setup > Select LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there
is 1/6 inch from the top of one print line to the top of the next print line.
To Next Page
Loading...
