Printronix T6000 - Media Cutter Option

267
Memory
Table 19. Memory Specifications
Flash Memory (standard)
128MB soldered onto Controller PCBA
DRAM (standard)
512MB soldered onto Controller PCBA
Media Cutter Option
Cutters are designed to cut tags and label liner. Avoid cutting through the adhesive backed portion of any
media.
Cutting through perforate liner is not recommended. In addition, although the cutter may operate with
synthetic, foil, and woven materials, application testing is encouraged to ensure reliable operation and to
assess cutter life.
Cutter
The cutter is designed to cut tags and label liner.
Table 20. 4 and 6 inch Models
Typical Life
> 1,000,000 cuts
Warranty**
500,000 cuts
Environment
Same specifications as printer
Cutting Method
4in Guillotine
6in Rotary
Cutting Method
Rotating single-edged blade
Media Thickness Range
0.0025 to 0.010 in. (0.064 to 0.254 mm)
Media Width Range
Same range as printer
Media Length Range
1.00 to 99 in. (25.4 to 2515 mm)
** Warranty is based on cutting label liner and paper based tag stock only. All other materials (including
synthetic, foil, and woven materials) may reduce cutter life to an indeterminate amount, even when they
are within the rated media thickness specification. Qualification and life-testing is recommended for these
cutter applications.