Printronix T6000 - Tools > Diagnostics

202
Tools > Print Tests > Run Tests
Novram Err Log
Prints detailed information about the most recent
Novram related failure. This option is useful when the
control panel faults with “Bad NVM” or “ILL NVM” type
errors. Contact the Customer Support Center if
such an error occurs.
Print Quality
Prints various patterns on one page that help in the
assessment of print quality, including Grey,
Checkerboard, and text. Number of patterns depends
on the current form length. This test should be run on
at least 6-inch media for the full test print.
ODV Report
This item appears only if the validator is installed.
Prints a report of the validation statistics since the
printer was turned on or since the last data reset.
Factory Default
Auto Calibrate
Tools > Print Tests > Test Count
This item selects the number of times the selected test pattern will be
printed.
Continuous
Print continuously until the user stops the test by
printing the ENTER key.
Selections
Choose among 1 Page, 2 Pages, 5 Pages, or 10
Pages.
Factory Default
Continuous
Tools > Diagnostics
Tools > Diagnostics > Print Error Log
This executable menu prints the current log of errors. Most non-routine faults
(RIBBON FAULT, PRINT HEAD HOT) are stored in the error log.
Tools > Diagnostics > Clear Error Log
This executable menu clears the error log.