Printronix T6000 - Configs; Configs > Control

199
Configs
Configs > Control
Configs > Control > Save Config
This option allows you to save up to eight unique configurations to meet
different print job requirements. This eliminates the need to change the
parameter settings for each new job. The configurations are stored in
memory and will not be lost if you turn off the printer. The factory default
configuration cannot be changed.
Minimum
1
Maximum
8
Factory Default
1
Configs > Control > Load Config
The printer can store up to eight configurations in memory. This parameter
allows you to select and load a specific configuration.
Factory
The factory configuration is the default.
1-8
Different saved configurations.
Factory Default
Factory
Configs > Control > Print Config
This option is used to print a listing of various stored printer configurations.
We recommend you store printouts of your configurations in a safe place for
quick referral.
Current
The current configuration loaded in DRAM.
Factory
The default factory configuration.
Power-Up
The configuration chosen as the power-up config.
All
All saved configurations, including factory.
1-8
Specific saved configuration selected.
Factory Default
Current