Media > Ribbon > Ribbon Low
When enabled and the amount of ribbon remaining on the supply spindle is
approximately 75 to 50 meters or less, a “Ribbon Low” warning will pop up on
the ONLINE screen.
No Ribbon Low warning will appear.
The Ribbon Low warning will appear when the ribbon
on the supply spindle is 75 meters or less.
Media > TOF > TOF Detect Fault
Allows selection of three different TOF (Top-of-Form) detection faults. The
printer displays a Gap Not Detected fault and stops printing when media has
advanced a distance equal to X or more times Media > Image > Label Length.
The Gap Not Detected fault is declared after 1 label.
The Gap Not Detected fault is declared after 3 labels.
The Gap Not Detected fault is declared after 9 labels.
The correct Label Length value, equal to the
physical length of the installed label, must be
entered in Media > Image > Label Length.
To Next Page
Loading...
