Printronix T6000 - Network > Ethernet

186
Network > Control > AutoSW Out
This menu determines when the autoswitching process will start.
Data Timeout
Allows Autoswitching when no data has been received
for the selected Time Out period.
Session Close
Allows Autoswitching only when the Network Socket is
closed.
Factory Default
Data Timeout
Network > Ethernet
WARNING Most of these menu items will not change until configuration of the printer is
deemed complete by the user and the printer is placed ONLINE. Upon going
online, the printer will automatically reboot and set these options.
Network > Ethernet > IP Address
This item allows you to set the IP Address for the TCP/IP protocol using a
virtual keyboard. Make sure you enter the complete IP address, including the
period symbol between the segments.
Structure
Seg1.Seg2.Seg3.Seg4
Factory Default
000.000.000.000
IMPORTANT
Disable BootP, ARP or DHCP before trying to
change the IP address.
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.