184
Network
For detailed information about using the NIC, refer to the Network Interface Card User’s Manual.
IMPORTANT Network menus are saved in the separate section of memory. Loading factory
configuration will NOT reset these items.
Network > Control
Network > Control > ASCII Data Port
This option allows you to set the port number for ASCII print jobs. The data
port number needs to match your host system setting.
Network > Control > Keep Alive Timer
This is the time that the Keep Alive Timer will run. Keep in mind that with the
Keep Alive Timer on, the TCP connection will stay connected even after the
print job has terminated if the host system does not close the connection.
To Next Page
Loading...
