Printronix T6000 - System > Printer Mgmt

89
System > SD File Edit > QCMC Update
This menu can be used to update the configuration within the QCMC image
stored on the SD card (see Appendix F Quick Change Memory Card
(QCMC) page 290).
System > SD File Edit > QCMC Erase
This menu can be used to erase the QCMC image stored on the SD card
(see Appendix F Quick Change Memory Card (QCMC) page 290).
System > Printer Mgmt
System > Printer Mgmt > Rcv. Status Port
This option defines the interface being used to receive the emulation status
command.
Automatic
When selected, the status command is sent to the
printer with the print data through the active host
interface.
Serial
When selected, the status command is sent to the
printer through the serial interface regardless of the
active host interface.
Factory Default
Automatic
System > Printer Mgmt > Ret. Status Port
This option selects the port for return Status Commands used by the
emulations. For PGL, this is the ~STATUS command, and for ZGL, this is
the ^HS command.
Automatic
Sends the data through the same port as used to
receive the application job.
Disable
Status is not sent back to the host.
E-NET Data
Port
Ethernet data port.
Serial
Serial RS-232 port
E-NET Stat Port
Ethernet port as set in Status Port Number menu
USB
USB
IEEE-1284
IEEE-1284 parallel interface
Factory Default
Automatic