Printronix T6000 - Page 90

90
System > Printer Mgmt > Status Port Number
This menu selects the port number the printer sends the emulation status.
Minimum
1025
Maximum
65535
Factory Default
3002
System > Printer Mgmt > PNE Port Choice
This menu selects which port the printer expects PNE (PrintNet Enterprise) to
connect to, via Ethernet or USB. The factory default is Ethernet.
Disable
PNE communication will be disabled.
Ethernet
Use Ethernet to connect with PNE.
USB
Use USB to connect with PNE.
Factory Default
Ethernet
System > Printer Mgmt > PNE Port Number
This menu selects the port number the printer expects PNE to connect
through.
Minimum
1025
Maximum
65535
Factory Default
3001
System > Printer Mgmt > PNE Port Timeout
If PNE has not communicated to the printer within a timeout period, the PNE
session closes.
Minimum
1 second
Maximum
255 seconds
Factory Default
100 seconds