System > Printer Mgmt > Mgmt Port Number
This menu selects the port number the printer expects the PXML or UCP to
connect through.
System > Printer Mgmt > Mgmt Protocol
Since PXML and UCP management protocols share the same Ethernet port,
only one can be active at a time. This menu selects the active Management
Protocol Interface, either PXML or UCP.
Printronix XML management protocol used to control
and manage the printer. See the XML Programmer
Reference Guide for more information.
The Universal Control Port that can be used for GPIO
or CST applications.
This option allows you to set the hour.
This option allows you to set the minutes.
To Next Page
Loading...
