System > Energy Star > Pwr Saver Active
This menu allows you to enable and disable Power Saver mode. If enabled,
the menu for Power Saver Time is in effect.
Power Saver mode is disabled and not used.
Power Saver mode is enabled.
System > Flash File View
This subsection will show all font and user downloaded files in FLASH memory. Files with one of the
filename extensions Filename Extensions Not Shown in Menus page 219 are not
shown in this section.
The name of the file will be shown along with its size in bytes. This is a read-only section.
System > Flash File Edit
This subsection can be used to configure how FLASH file storage can be used and allow the users to
delete files, copy files to the SD card, optimize memory, etc.
System > Flash File Edit > Overwrite Files
This allows you to prevent files from being overwritten by disabling the
overwrite function.
Files cannot be overwritten either from copying a file
from an SD card or by the host application.
Files can be overwritten as needed.
When files are overwritten, the FLASH used for the
original file is not truly deleted. Instead, that
memory goes to the Flash Reclaimable area and
cannot be used again until an Optimize & Reboot
is performed.
System > Flash File Edit > Delete Files
This allows the user to delete user files in FLASH memory.
File 1 is listed and will be deleted if selected.
File N represents the last user file in FLASH.
When files are deleted, the file cannot be used, but
the space cannot be used again until an Optimize
& Reboot is performed.
To Next Page
Loading...
