Application > Epson FX Setup > Printer Select
Determines if control codes DC1 and DC3 will ignored or used to disable or
enable the printer, respectively.
Ignores the ASCII DC1 and DC3 control codes.
Disables the printer when control code DC1 is received
and enables the printer when DC3 is received.
Application > Epson FX Setup > 20 CPI Condensed
Compressed print characters are narrower than the normal character set.
This is helpful for applications where you need to print the maximum amount
of information on a page.
Does not compress print widths, even if condensed
print is chosen by the host.
Prints about 60% of the width of normal characters
when compressed print is chosen by the host
computer.
Application > Epson FX Setup > Alt. Set 80-9F
Determines how data in the range 80 hex – 9F hex will be treated.
Interprets as a control code.
Prints data in this range.
Application > Fonts > Standard Chars.
This menu entry permits you to adjust the thickness or font weight of
standard text fonts.
To Next Page
Loading...
