Media > Speed > Print Speed
This option specifies the speed in inches per second (ips) at which the media
passes through the printer while printing.
6204: 14 ips, 6304: 12 ips
6206: 12 ips, 6306: 10 ips
Media > Speed > Reverse Speed
This option sets the speed at which the media moves in reverse direction.
Speeds above 2 ips may cause ribbon smudging
depending on
ribbon and media.
Media > Speed > Slew Speed Control
Controls how slew speed is chosen. By default, it will match Print Speed.
Always the same as the print speed.
Allows you to set the slew speed independently from
Print Speed by unhiding the Media > Speed > Slew
Speed menu.
Media > Speed > Slew Speed
When the Media > Speed > Slew Speed Control is set to Manual, this menu is
unhidden. The range and defaults are consistent with Print Speed.
Same as Print Speed minimum
Same as Print Speed maximum
Only available when Media > Speed > Slew Speed
Control is set to Manual.
To Next Page
Loading...
