Application > P-Series XQ Setup > Define CR code
This option controls the action of the printer when it receives a Carriage
Return code (0D hex) from the host computer. If this feature is enabled, each
time the printer receives a carriage return, it inserts an additional Line Feed
code (0A hex) into the data stream. Do not use this feature if the host
computer sends line feeds to the printer.
Does not insert an extra line feed after each carriage
return.
Inserts an extra line feed after each carriage return.
The next print position will be print position 1 of the
next line.
Application > P-Series XQ Setup > Auto LF
This option defines the printer action when print data is received past the
forms width setting.
Discards any data past the forms width.
Performs an automatic carriage return and line feed
when data is received past the forms width.
Application > P-Series XQ Setup > Define LF Code
This option controls the action of the printer when it receives a Line Feed
code (0A hex) from the host computer. If this feature is enabled, each time
the printer receives a line feed, it inserts an additional carriage return code
(0D hex) into the data stream. Do not use this feature if the host computer
sends carriage returns to the printer.
Does not insert a carriage return before each line feed.
The next print position will be the current print position
of the next line.
Inserts an extra carriage return before each line feed.
The next print position will be print position 1 of the
next line.
To Next Page
Loading...
