Printronix T6000 - Page 188

188
Network > Ethernet > DHCP
You can enable/disable the DHCP protocol using this option, but consult
your administrator for the appropriate setting.
Disable
DHCP is disabled and you set your own static IP
address, subnet mask, and gateway address.
Enable
DHCP is enabled and IP address, subnet mask, and
gateway address is assigned dynamically.
Factory Default
Enable
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.
Network > Ethernet > BootP
You can enable/disable the BootP protocol using this option, but consult
your administrator for the appropriate setting.
Disable
BootP is disabled.
Enable
BootP is enabled.
Factory Default
Disable
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.