Network > WLAN> Subnet Mask
This item allows you to set the Subnet Mask for the TCP/IP protocol using a
virtual keyboard. Make sure you enter the complete mask, including the
period symbol between the segments.
Disable BootP, ARP or DHCP before trying to
change the subnet mask.
If the printer has not rebooted after disabling
BootP, ARP or DHCP then the value shown is not
the static value. You MUST save this value or it will
be lost when the printer is rebooted.
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN > Gateway Address
This item allows you to set the Gateway Address for the TCP/IP protocol
using a virtual keyboard. Make sure you enter the complete Gateway
address, including the period symbol between the segments.
Disable BootP, ARP or DHCP before trying to
change the gateway address.
If the printer has not rebooted after disabling
BootP, ARP or DHCP then the value shown is not
the static value. You MUST save this value or it will
be lost when the printer is rebooted.
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN > MAC Address
This item is the Manufacturer’s Assigned Number, and is unique for each
NIC. It is read-only.
To Next Page
Loading...
