Printronix T6000 - Page 196

196
Network > WLAN Params > Default WEP Key
Allows you to set the default WEP key (1-4) or None (0).
Factory Default
0
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > Reset WEP Keys
Allows you to reset all four WEP keys (WEP Key 1 through WEP Key 4) at
one time.
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > WPA Mode
Selects the WPA wireless security mode.
Disable
WPA security is disabled.
Personal
Selects personal or pre-shared key (PSK) mode for
WPA security.
Enterprise
802.1x is more secure than WPA2 mode. Enterprise
mode uses dynamic encryption keys distributed
securely after a use logs in with their username and
password, or provides a valid digital certificate. An
Extensible Authentication Protocol (EAP) is used for
authentication.
Factory Default
Disable
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.