306
Slew Vertical paper movement.
Standard-Pitch RFID
Labels Labels with RFID inlays that typically have a pitch
from 2.0 to 6.0 inches. These labels support
encoding of the tag and provide ample space to
print
text, graphics, barcodes, or logos.
Stop Bits The signal which indicates the end of a character
or element.
Media Media specifically designed to work with a ribbon
for
image transfer. In Thermal Transfer mode,
compatibility between the ribbon and the media is
critical in producing a high quality, long lasting
image.
Printing A printing method in which the printhead presses a
specially coated ribbon against the media. The
printhead elements react with the ribbon and bond
the image to the media.
Sensing Use of the upper media sensor to transmit infrared
light
through the top of media which is then received
by the
lower media sensor to detect gaps, holes, or
notches
for determining the Top-of-Form position on
labels or
for indicating a Paper Out condition.
To Next Page
Loading...
