Quantum Scalar i80 User Manual

Chapter 9: Installing, Removing, and Replacing Components
Installing the Library in a Desktop Kit
250 Quantum Scalar i40 and Scalar i80 User’s Guide
c Slide the side panel toward the front of the library about half an
inch until it stops and the posts are engaged in the holes. The
side panel should be flush with the side of the library chassis.
d Tighten the thumbscrew at the front of the library to secure the
side panel to the library.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g