3. Installation and setup ABL800 FLEX Operator's Manual
Analyzer settings
Programs
The Analyzer Settings includes the programs described in this section.
Activate a button to enter the program.
Analyzer ID
This program allows you to change the analyzer’s identification.
To enter analyzer ID do the following:
Step Action
1.
Touch and highlight the "Analyzer name" box.
2.
Type in an identification name and/or number for the analyzer (up to
32 characters), using the screen keypad or keyboard. Confirm with
Enter.
NOTICE: Installation number cannot be changed. Quote this number in any
technical inquiries you have to Radiometer.
Continued on next page
3-62
To Next Page
Loading...
