3. Installation and setup ABL800 FLEX Operator's Manual
Patient reports
Purpose
This program allows you to create a number of new layouts for patient reports or to
modify the existing ones.
The screen accomodates two main functions: creating a layout and editing a layout.
Creating a
layout
To create a new layout, do the following:
Step Action
1.
Press New to make a new blank layout with the name "New"
displayed on the right side of the screen in the "Name" box.
If you wish to make a copy of an existing layout and use it as a basis
for a new layout, select the desired layout and press Copy. "Copy"
will be added to the name in the "Name" box (i.e. "-R- default Copy").
Press the keyboard icon beside the "Name" box
Type in a new name for your layout.
Confirm with Enter to return to the Patient Report Setup screen.
The newly named layout will be added to the list of layouts.
Edit your layout as described in Editing a layout further in this
section.
2.
Continued on next page
3-26
To Next Page
Loading...
Need help?
General
