8. Disk functions ABL800 FLEX Operator's Manual
Loading/restoring setup
Purpose
You can re-install a saved setup quickly and easily without performing the Setup
programs. If desired, only part of the setup can be loaded, e.g. operators.
Loading a setup
To load a setup, do the following:
Step Action
1.
Press Select All to include all items from the list on the screen.
Or press Deselect All to exclude all items from the list.
2.
To select single items, do the following:
• Highlight the desired item, using the up and down arrow buttons.
• Press the check button (3) to include an item.
3.
To open or close a group of items, highlight the group title (e.g.
General) and press the ± button.
4.
Press the Change Source button to select the source.
If a CD-RW is used, place it in the CD-drive.
If a removable disk is used, connect it to the USB port.
Select required source by touching and highlighting it on the screen.
Press the Expand/Collapse button to access the required folder. The
chosen source appears in the “Choose a directory” box.
5.
Press the Back button to return to the Load Setup screen.
6.
Press Continue.
The analyzer will shut down and then restart with reloaded setup
configuration.
Pressing Cancel will terminate loading the setup.
See chapter 15: Radiometer settings in this manual.
Contents of
Setup settings
8-14
To Next Page
Loading...
Need help?
General
