RADIOMETER ABL800 FLEX User Manual

ABL800 FLEX Operator's Manual 2. What Is what
Barcode reader
Barcoded items
The following items have barcodes that can be read into the analyzer:
Item Location of barcode
All solution containers Label on the container
QC ampoules Insert in the box containing the ampoules
tHb calibration ampoules Insert in the box containing the ampoules
Electrodes Label on the box containing the electrode
Electrode membranes Label on the box containing the membrane unit
Gas cylinders Label on the cylinder
Pump tubing Label on the tubing packaging
Fan filter Label on the box containing the filter
Inlet gasket Label on the box containing the inlet gasket
In addition to the items above, you can enable every text box on the Patient
Profile, Patient ID, Patient Result, QC ID and Recording Fluid Replacement
screens where it is possible to enter a barcode – refer to Miscellaneous Setup in
chapter 3: Installation and setup.
Reading in a
barcode
Hold the barcode of the item you wish to read in parallel to the sensor part of the
barcode reader. A short beep from the barcode reader indicates that the information
has been read in successfully.
Sensor part
2-13

RADIOMETER ABL800 FLEX Specifications

General

Brand	RADIOMETER
Model	ABL800 FLEX
Category	Measuring Instruments
Language	English