8. Disk functions ABL800 FLEX Operator's Manual
Backing up all data
Purpose
This function is intended as a protection or security against the loss of data or
system files that includes, but is not limited to, the following:
•
Patient report data
•
Quality control data (i.e. results, statistics, plots)
•
Patient profile data
•
Calibration results and setup (i.e. schedule)
•
Setup data
•
Activity data (i.e. replacement actions, system
messages)
Manually performed backup: data can be stored on the internal hard disk, the
network, CD-RW or removable drive.
Automatic backup
(can be selected – see Disk Functions Setup in chapter 3): data
can be stored on the internal hard disk or the network.
In case of data loss or similar problem, the loss can be minimized by using the
backup file and the Restore All Data function.
NOTICE:
It is the user's responsibility to ensure that all valuable data is regularly backed up.
During the warranty period of the ABL800 FLEX analyzers Radiometer accepts
warranty responsibility for the original storage hardware and installed software
only.
Creating a
backup of all
data
To make a backup of all data, do the following:
Step Action
1.
Press Change Destination to choose the destination.
2.
Select the drive/directory by touching it on the screen.
If a CD-RW is used, place it in the CD-drive.
If a removable drive is used, connect it to the USB port.
Use the Expand/Collapse button to choose a destination directory,
then press Back to return to the previous screen.
Continued on next page
8-6
To Next Page
Loading...
Need help?
General
