ABL800 FLEX Operator's Manual 8. Disk functions
Backing up all data, Continued
Creating a
backup of all
data (continued)
Step Action
3.
On the Backup All Data screen press Start to continue.
(Or press Back to cancel and return to the Ready screen.)
4.
The backup process begins.
• Network drive or internal hard disk drive: backup continues
without any further action from the operator.
• CD- or removable drive: wait for the data to be prepared (see the
timer in the current task field located beside the status indicator in
the upper left corner of the screen) and press Start.
5.
If the analyzer status shows a “Backup done” message, the process is
complete. Press Close to return to the Ready screen.
8-7
To Next Page
Loading...
