9. Data management ABL800 FLEX Operator's Manual
Activity Log, Continued
Filter function
(continued)
Step Action
3.
Use the arrow buttons to highlight the desired search criterion or
criteria.
NOTICE: If you filter the Activity Log for "Replacement" only and
set the message level to Manager or Service, the "Activity Log"
changes to "Replacement Log".
4.
When all the criteria have been selected, press Apply to start.
5.
The Activity Log displays the list of selected activities.
By selecting the message level, you can see messages on the user,
manager or service levels.
The Add Message button is available on all levels.
6.
Press Filter to set other search criteria if desired.
Press Close to return to the Ready screen.
9-22
To Next Page
Loading...
